Leader in machined plastics and resin bonded fabrics Engineering plastics and composites

STANDARD SIZES for Kite Brand TUFNOL


Despatch is normally ex-stock for items shown in BOLD.  Other items may require to be made to order.

Sizes not listed may be available, subject to special order.


SHEETS


Thickness

WHOLE SHEETS

HALF SHEETS

 

Nominal Size

Nominal Size

mm

mm

mm

0.8

1200 x 1200

1200 X 600

1

1200 x 1200

1200 X 600

1.6

1200 x 1200

1200 X 600

2

1200 x 1200

1200 X 600

2.5

1200 x 1200

1200 X 600

3

1200 x 1200

1200 X 600

3.2

1200 x 1200

1200 X 600

4

1200 x 1200

1200 X 600

5

1200 x 1200

1200 X 600

6

1200 x 1200

1200 X 600

6.4

1200 x 1200

1200 X 600

8

1200 x 1200

1200 X 600

9.5

1200 x 1200

1200 X 600

10

1200 x 1200

1200 X 600

12

1200 x 1200

1200 X 600

12.7

1200 x 1200

1200 X 600

14

1200 x 1200

1200 X 600

15

1200 x 1200

1200 X 600

16

1200 x 1200

1200 X 600

19

1200 x 1200

1200 X 600

20

1200 x 1200

1200 X 600

25

1200 x 1200

1200 X 600

25.4

1200 x 1200

1200 X 600

Other sizes up to 25.4mm thick can readily be made to order.

Standard sheet size is 1200 x 1200mm approximately.  Sheets 1525 x 1200mm approximately can also be made to order.

Thicknesses below 1.0mm have a special matt finish.

Minimum production quantities may apply for certain items.


ROUND TUBES

Thousands of sizes available up to 228.4mm (9 inches) outside diameter.  Refer to TUFNOL for full details.

Standard lengths are 1200mm approximately for tubes up to 105mm outside diameter, and 585mm long approximately for larger diameters.

 Minimum production quantities may apply for certain items.


OTHER SECTIONS

SQUARE and RECTANGULAR TUBES

Many sizes available, from 4.8 x 4.8mm to 69.8 x 69.8mm (3/16 x 3/16 inches to 2 3/4" x 2 ¾ inches) outside dimension. Refer to TUFNOL for full details.

Standard lengths are 1200mm approximately for tubes up to 105mm outside diameter, and 585mm long approximately for larger diameters.

Minimum production quantities may apply for certain items.


ANGLE SECTION

Angles are made in sizes from 6.3 x 9.5mm up to 149.2 x 149.2mm (1/4 x 3/8 inches to 5 7/8 x 5 7/8 inches). Smaller sizes may be cut from rectangular tube, larger sizes moulded individually.  Refer to TUFNOL for full details.

Standard lengths are 1200mm approximately for tubes up to 105mm outside dimension, and 585mm long approximately for larger sizes.

Minimum production quantities may apply for certain items.


CHANNEL SECTION

Channel sections are cut from rectangular tube.  See size range above (deduct 3.2mm (1/8 inch) from relevant dimension to allow for tool cut.)  Refer to TUFNOL full details.

Standard lengths: see rectangular tube.

Minimum production quantities may apply for certain items.

Note: Round Rods and other solid sections are not available in Kite Brand TUFNOL. See Swan Brand TUFNOL.